New released XTUNER T1 is an auto intelligent diagnostic tool for heavy duty trucks. Here is disclosing full information about the powerful unit, including vehicle coverage, supported language, functions, features, supported systems etc.
XTUNER T1 is 2017 new launched Heavy duty PC-to-vehicle diagnostic interface for most of heavy trucks, Buses, Grabs, Cranes and Engineering Machines. Its Vehicle coverage:
ALLISON, ASTRA, BENZ, BREMACH, DAF, DETROIT, ERF, FOTON, FREIGHTLINER, FUSO, HINO, HYUNDAI, INTERNATIONAL, ISUZU, IVECO, KENWORTH, KIA, MACK, MAN, MaxxForce, NAVISTAR, RENAULT, SCANIA, TOYOTA, UD, VOLVO, WABCO, ect.
Electronic control system: BENDIX, CUMMINS
Standard OBD: Diesel OBD
XTUNER T1 HD Layout picture:
Language: English only
What about XTUNER T1 function?
Read ECU Info, Read DTCs, Erase DTCs, Clear learning value, Data Stream, Actuations, Read freeze frame data, Read/Write VIN, Basic Reset, Control unit adaptations, Air bleeding, Level calibration, Oil change, Idle speed learning, Idle speed Adjustment, Camshaft timing control learning, Broken cylinder test, Dpr Manual Forced Regeneration, Injector Codes, etc.
Special Functions:DPF Reset, Nozzle Or Injector,Fuel Pump,Exhaust Pressure Adjustment,EGR,ECM,Vehicle Speed CONTROL,Cylinder,VIN,Write Engine Serial Number,Turbo Control
TOP GOOD Points about XTUNER T1?
- Extensive vehicle coverage for heavy-duty trucks.
- Complete function capability including DTC, DTC freeze Info, Live data, Actuation test and Special function.
- Support standard protocol J1939, J1708 and J1587
- Supply USB & WIFI connection for the VCI
- New software update on the internet.
- Support Windows XP/7/8/10 operating systems
- Supply OBDII and other 10 connector.
- High-quality hardware building, use it anywhere
- Built-in over voltage protection module is applied, in order to protect VCI and vehicle against accidental damage during checking.
- Can work well and stably in high and low temperature environment.
- Extremely easy-to-use with touch-screen operation and intuitive operation in the windows.
All software below can be used with XTUNER T1:
– Allison
– Bendix 6.3.8.0
– Detroit Diesel DDDL 7.05
– Detroit Diesel DDCT
– Detroit Diesel Calibration Tool
– Eaton Service Ranger 3.2
– International DLB
– International ICAP, IPTS, NETS, IPC
– International Master Diagnostic
– Meritor and Wabco Diagnostics
– Cummins Insite 7.5
– Hino 2.0.3.
– Caterpillar 2.0.1.0
– Perkins EST 2010B
– V Macks 2.6.12
– V Macks Dealer Pro
– Volvo VCADS 2.35.10
– Toyota Techstream for car
Part 4: System Coverage
ABS (anti-lock brake system)
After treatment system
Airbag
Air conditioning system
ATA Anti-theft alarm system
ATA (Auxiliary heating system air-to-air)
AUS (Audio system)
Behr independent air-conditioning system
BMS (Brake Management System)
Body control system
Bosch DENOX AdBlue System
Break control system
BWS (Preparation system)
CCS (Climate control system)
CLS /ATA central locking system with anti-theft alarm
Comfort /assistance /safety systems
Compressed Air Reserve system
CSS (Collision safety system)
CTS (Clock and Time System)
EBS (Brake System)
EBS (Electronically Controlled Brake System)
Electrohydraulic steering system (EHLA)
EMS (Engine Management System)
Engine management system
Engine System
FLA Flame starting system
GMS (Gearbox Control System)
Instrumentation System
Lane departure alarm system
LAS (Lock and alarm system)
LGS (Lane Guard System)
MAN Marine Diagnostic System (MMDS)
Meritor Wabco Brake System
MTS Modular door control system
RAS-EC1 steering system
Security System
SRS Supplemental restraint system
Suspension System
Torque converter and clutch system
TPM (Tires pressure Monitoring System)
Transport Information System
Vehicle control system
Vehicle elctrical system power converter
VIS (Visibility System)
VRDU Driver assistance system
WS Maintenance System
WTA (Auxiliary heating system water-to-air)
ZVA Central locking system
Etc…
Specification:
| Operating System | Windows XP/7/8/10 |
| Processor | ARM 32-bit Cortex processor |
| Communications | 802.11 b/g Wireless LAN |
| Input Voltage | DC 8-28V |
| Operating Temperature | -10 to 70 °C（14-158°F）,Relative Humidity:<90% |
| Storage Temperature | -30 to 120°C（-22 to 248°F）,Relative Humidity:<90% |
| Communication model | Wi-Fi or USB |
| Protocols | UDS, ISO 9141-2, K/L lines, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898 ISO 15765-4, High speed, Middle speed, low speed and Single wire CAN, SAE-J1939, SAE-J1708, SAE-J1587 |
Packing List
| CATGORY | NAME | QTY |
| Main Units | XTUNER T1 VCI | 1 |
| Main Test Cable with OBDII connector | 1 | |
| Test Connectors | BENZ-14 | 1 |
| CAT-9 | 1 | |
| DENSO-12 | 1 | |
| DIESEL-6 | 1 | |
| DIESEL-9 | 1 | |
| ISUZU-20 | 1 | |
| ISUZU-3 | 1 | |
| IVECO-30 | 1 | |
| OBD-16 | 1 | |
| VOLVO-8 | 1 | |
| Universal Cable | 1 | |
| Accessories | Battery Cable | 1 |
| Cigar Lighter Cable | 1 | |
| USB Cable | 1 | |
| Packing List | 1 | |
| Quick Start Guide | 1 |
No comments:
Post a Comment